Relative Costs of Different Roofing Materials

Most moisture problems in a building start at the roof, particularly where the roof meets the wall and penetrations. Good quality roofing is the key to keeping water out of your building and facades!

There is no best type of roof. Selecting the right materials depends on if you’re replacing or constructing a new roof, the condition of the roofing, insulation, and deck, and other variables like climate, foot traffic, and wind exposure.

Average costs for quality materials (as of 2018) are:

• EDPM (Ethylene Propylene Diene Terpolymer, Synthetic Rubber, (innertube)): Thermosetting – hardens when heated. >15-year life span. $5.50 per square foot.
• PVC (polyvinyl chloride): >15-year life span. 3x thicker than EPDM and plastic single ply sheets. $8.50 per square foot.
• TPO (thermoplastic Olefin): Combination of thermoplastic, elastomer or rubber, and a filler. <15-year lifespan. $7.00 per square foot.

Read the entire article about roof inspection on our website!

Use the IEI Advantage to Protect Your Roof

A roof inspection is recommended twice a year – primarily right before and after winter. However, if your roof is subject to severe weather such as a hailstorm or hurricane, it may be prudent to schedule an inspection to assess any potential damage that may have been caused.

Innovative Engineering Inc.’s Certified Remote Pilots comply with FAA Part 107 Guidelines. They also hold a daylight operations waiver which allows them to fly at night, which is the best time to conduct thermal inspection.

The engineers at IEI have extensive experience with various methods of roof inspection. If you feel that it is time to address any problems (either potential or already confirmed) with the roof of your facility, give IEI a call today. Their engineers will be happy to provide you with a detailed report of any deficiencies that need to be addressed. Contact us today!